Nonmetallic Hose Assembly P/N 13211E3148-8

Specifications

Connection type

First End Threaded Internal Tube

Features provided

Reusable End Fittings

Burst test pressure

Pounds Per Square Inch 16000.0

Fitting component and surface treatment

First End Complete Fitting Cadmium and Complete Fitting Zinc

End fitting component and material

All Ends Complete Fitting Steel Corrosion Resisting and Complete Fitting Steel

End connection design

First End Straight

Thread class

2B

Thread direction

First End Right-Hand

Inside diameter

0.750 in (nominal)

Temp rating

Single Response Fahrenheit -25.0 and Fahrenheit 200.0

Outside diameter

1.230 in (nominal)

Minimum inside bending radius

Inches 9.500

Measuring method and length

Inches Nominal Overall 96.000

Special features

Inner Conveying Tube Material-Rubber, Synthetic; Aluminum Identification Sleeve on Hose,MIL-L-52325,Paragraph 3.9.1

Item structural composition

Second Layer Spirally Laid Steel Wire

Item structural composition

Third Layer Spirally Laid Steel Wire

Special test features

MIL-L-52325,Paragraph 4.7.2.1

Thread series designator

First End UNF

Outer covering environmental protection

Abrasion Resistant and Oil Resistant and Weatherproof

Media for which designed

Single Response Fuel/oil, Hydrocarbon

Item structural composition

First Layer Spirally Laid Steel Wire

Item structural composition

Fourth Layer Spirally Laid Steel Wire

Inside surface condition

Smooth

Seat angle

First End Degrees 37.0

Item structural composition

Outer Layer Molded Rubber, Synthetic

Nominal thread size

First End Inches 1.062

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 3800.0

Hydrostatic test pressure

Pounds Per Square Inch 7000.0

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

13211E3148-8 A1136-8 FG1089KKK0960 FB8629-07

Also referenced as

1211E3148

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 41 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 4720-00-872-7713?
NSN 4720-00-872-7713 (4720008727713) — Nonmetallic Hose Assembly: SECO Parts has 41 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 4720 (Hose and Flexible Tubing).

Is NSN 4720-00-872-7713 available?
SECO Parts has 41 in stock in Augusta, GA — order or request a quote below.

How much does NSN 4720-00-872-7713 cost?
The government catalog (FEDLOG) lists NSN 4720-00-872-7713 at $178.39 per each. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What part numbers cross-reference to NSN 4720-00-872-7713?
Part numbers that cross-reference this NSN include 13211E3148-8, A1136-8, FG1089KKK0960, FB8629-07. It is also referenced by older, superseded or advisory numbers: 1211E3148. SECO can quote against any of them.