Nonmetallic Hose Assembly P/N 89303-6

Specifications

Thread class

3B

Thread direction

First End Right-Hand

Inside diameter

0.500 in (nominal)

Temp rating

Single Response Fahrenheit 0.0 and Fahrenheit 200.0

Outside diameter

0.880 in (nominal)

Minimum inside bending radius

Inches 5.000

End connection design

First End Straight

End fitting component and material

All Ends Nut Steel Corrosion Resisting

Fitting component and surface treatment

First End Nut Passivate

Connection type

First End Threaded Internal Pipe

Burst test pressure

Pounds Per Square Inch 800.0

Layer composition and location

1ST Layer Molded Rubber, Ethylene Propylene and 2ND Layer Braided Rayon Cord and 2ND Layer Braided Polyester Cord and Outer Layer Molded Rubber, Ethylene Propylene

Nominal thread size

First End Inches 0.750

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 200.0

Criticality code justification

Feat

Measuring method and length

Inches Minimum Working 65.250 and Inches Maximum Working 66.750

Special features

Weapon System Essential

Item structural composition

First Layer Molded Rubber, Ethylene Propylene

Item structural composition

Outer Layer Molded Rubber, Ethylene Propylene

Item structural composition

Second Layer Braided Rayon Cord or Braided Polyester Cord

Thread series designator

First End Unified National Joint Fine (Unjf)

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

89303-6 89303-006 7265468-6 5859793-6 T153-97672-8-0660-TI AH2186800-8-0660

Also referenced as

5859793-2 T153-97672-6-0660-TI AH2186800-6-0660 7265468

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 1 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 4720-01-320-8230?
NSN 4720-01-320-8230 (4720013208230) — Nonmetallic Hose Assembly: SECO Parts has 1 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 4720 (Hose and Flexible Tubing).

Is NSN 4720-01-320-8230 available?
SECO Parts has 1 in stock in Augusta, GA — order or request a quote below.

How much does NSN 4720-01-320-8230 cost?
The government catalog (FEDLOG) lists NSN 4720-01-320-8230 at $1,354.73 per each. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What does NSN 4720-01-320-8230 fit?
The federal catalog lists NSN 4720-01-320-8230 as used on: Arleigh Burke Class Ddg; Missile System, Aegis Surface (Sms) MK 7; Ticonderoga Class CG (47).

What part numbers cross-reference to NSN 4720-01-320-8230?
Part numbers that cross-reference this NSN include 89303-6, 89303-006, 7265468-6, 5859793-6, T153-97672-8-0660-TI, AH2186800-8-0660. It is also referenced by older, superseded or advisory numbers: 5859793-2, T153-97672-6-0660-TI, AH2186800-6-0660, 7265468. SECO can quote against any of them.