Shear Bolt P/N NAS6606D32

Specifications

Thread class

3A

Thread direction

Right-Hand

Thread length

0.553–0.603 in

Fastener length

2.563–2.593 in

Head height

0.188–0.203 in

Width between flats

0.554–0.564 in

Grip diameter

0.3735–0.3745 in

Shank unthreaded hole diameter

First Hole Inches Minimum 0.106 and Inches Maximum 0.116

Nominal thread diameter

Inches 0.375

Grip length

1.990–2.010 in

Thread quantity per inch

24

Minimum tensile strength

Pounds Per Square Inch 160000

Distance from head largest bearing surface to shank hole center

First Hole Inches Minimum 2.356 and Inches Maximum 2.406

Surface finish

Bearing Surface of Head Microinches 32.0

Surface finish

Threads Microinches 32.0

Surface finish

Grip Microinches 32.0

Material

Overall Steel Comp E4340 or Steel Comp 8740

Material document and classification

Overall MIL Spec 1ST Material Response -IL-S-5000 or MIL Spec 2ND Material Response -IL-S-6049 or Assn STD 2ND Material Response A-S6322

Surface treatment

Overall Cadmium and Chromate

Surface treatment document and classification

Overall Fed Spec Single Treatment Response QQ--416,Tye 2,Class 2

Thread series designator

Unified National Joint Fine (Unjf)

Specification/standard data

Professional/industrial Association Standard 80205-NAS6606

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

NAS6606D32

Also referenced as

10116146

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 40 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5306-01-200-1429?
NSN 5306-01-200-1429 (5306012001429) — Shear Bolt: SECO Parts has 40 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for shear bolt in federal supply class 5306 (Bolts).

Is NSN 5306-01-200-1429 available?
SECO Parts has 40 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5306-01-200-1429 cost?
NSN 5306-01-200-1429 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.

What part numbers cross-reference to NSN 5306-01-200-1429?
Part numbers that cross-reference this NSN include NAS6606D32. It is also referenced by older, superseded or advisory numbers: 10116146. SECO can quote against any of them.