Pull Switch P/N MIL-S-13625/2-1

Specifications

Body height

1.540 in (nominal)

Unthreaded mounting hole diameter

0.255–0.275 in

Center to center distance between mounting facilities parallel to diameter

1.765 in (nominal)

Actuator length

2.500 in (nominal)

Mounting method

Unthreaded Hole(S)

Nonpile-up contact arrangement

Single Switch Unit Pole, Single Throw, Normally Closed, Double Break, Momentary Action 1

Contact load current rating at maximum rated voltage

Amperes Resistive DC 300.000 and Amperes Inductive DC 150.000

Body diameter

2.690 in (nominal)

Inclosure type

Fully Inclosed

Terminal type and quantity

Threaded Stud 2

Specification/standard data

Government Specification 81349--IL-S-13625 to 2

Precious material and location

Silver Contacts

Test data document

Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data in Specification Format; Excludes Commercial Catalogs, Industry Directories, and Similar Trade Publications, Reflecting General Type Data on Certain Environmental and Performance Requirements and Test Conditions That Are Shown AS "Typical", "Average", "Nominal", Etc.). 81349--IL-S-13625

Actuator inscription

Pull-Turn

Actuator height

1.900–2.350 in

Actuator width

1.250 in (nominal)

Maximum voltage rating in volts

DC 28.0

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

MIL-S-13625/2-1 1996485 MIL-DTL-13625/2-1 MIL-S-13625/2 MS27200-1 B96843 4813

Also referenced as

10500715

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	D DLA/GSA stocked — stocked by DLA or GSA and issued from central stock
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5930-00-930-5016?
NSN 5930-00-930-5016 (5930009305016) — Pull Switch: SECO Parts has 10 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for pull switch in federal supply class 5930 (Switches).

Is NSN 5930-00-930-5016 available?
SECO Parts has 10 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5930-00-930-5016 cost?
The government catalog (FEDLOG) lists NSN 5930-00-930-5016 at $274.91 per each. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What part numbers cross-reference to NSN 5930-00-930-5016?
Part numbers that cross-reference this NSN include MIL-S-13625/2-1, 1996485, MIL-DTL-13625/2-1, MIL-S-13625/2, MS27200-1, B96843, 4813. It is also referenced by older, superseded or advisory numbers: 10500715. SECO can quote against any of them.