Sensitive Switch P/N MIL-S-8805/4

Specifications

Overall length

0.510 in maximum

Center to center distance between mounting facilities parallel to length

0.188 in (nominal)

Overall height

0.520 in (nominal)

Overall width

0.210 in maximum

Body length

0.510 in maximum

Body width

0.210 in maximum

Body height

0.350 in (nominal)

Unthreaded mounting hole diameter

0.088 in (nominal)

Actuator diameter

0.062 in (nominal)

Actuator height

0.050 in (nominal)

Actuator free position height

0.320 in (nominal)

Maximum voltage rating in volts

AC 115.0 and DC 28.0

Inclosure type

Fully Inclosed

Mounting method

Threaded Hole(S)

Nonpile-up contact arrangement

Single Switch Unit Pole, Double Throw, One Position Momentary 1

Switch release force

1.0 oz minimum

Switch actuating force

5.0 oz maximum

Actuator movement

Pretravel Inches Maximum 0.020 and Overtravel Inches Minimum 0.004 and Differential Inches Maximum 0.005

Contact load current rating at maximum rated voltage

Amperes Resistive DC 5.000 and Amperes Inductive DC 3.000 and Amperes Lamp DC 2.500 and Amperes Resistive AC 5.000 and Amperes Inductive AC 5.000 and Amperes Lamp AC 2.000

Material

Case Plastic

Precious material and location

Gold Ter-Inal Surfaces

Test data document

Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data in Specification Format; Excludes Commercial Catalogs, Industry Directories, and Similar Trade Publications, Reflecting General Type Data on Certain Environmental and Performance Requirements and Test Conditions That Are Shown AS "Typical", "Average", "Nominal", Etc.). 81349--IL-S-8805

Terminal type and quantity

Turret 3

Specification/standard data

Government Specification 81349--IL-S-8805 to 4

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

MIL-S-8805/4 MS24547-4

Also referenced as

21SX39-T2

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 1 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5930-01-108-8542?
NSN 5930-01-108-8542 (5930011088542) — Sensitive Switch: SECO Parts has 1 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for sensitive switch in federal supply class 5930 (Switches).

Is NSN 5930-01-108-8542 available?
SECO Parts has 1 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5930-01-108-8542 cost?
SECO typically prices parts like NSN 5930-01-108-8542 at $25–$45 each: an estimate from the government catalog price and what SECO has charged for similar parts. It is not a quote — request one for your price, usually answered the same business day. Quote lines carry a $50 minimum.

What part numbers cross-reference to NSN 5930-01-108-8542?
Part numbers that cross-reference this NSN include MIL-S-8805/4, MS24547-4. It is also referenced by older, superseded or advisory numbers: 21SX39-T2. SECO can quote against any of them.