Nonmetallic Hose Assembly P/N 1C00964GGH0400A

Specifications

Thread class

3B

Thread direction

First End Right-Hand

Inside diameter

0.380 in (nominal)

Temp rating

Single Response Fahrenheit -40.0 and Fahrenheit 200.0

Outside diameter

0.840 in (nominal)

Minimum inside bending radius

Inches 3.500

End connection design

First End Straight

Connection type

First End Threaded Internal Tube

Burst test pressure

Pounds Per Square Inch 16000.0

Nominal thread size

First End Inches 0.750

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 4000.0

Seat angle

First End Degrees 37.0

Hydrostatic test pressure

Pounds Per Square Inch 8000.0

Outer covering environmental protection

Abrasion Resistant

Inside surface condition

Smooth

Measuring method and length

Inches Nominal Overall 40.000

Special features

Permanent Fitting Both Ends

Media for which designed

Single Response Fuel/oil, Hydrocarbon

Item structural composition

First Layer Braided Steel Wire

Item structural composition

Outer Layer Wrapped Rubber, Synthetic

Thread series designator

First End UNF

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

1C00964GGH0400A FL1009GGH0400

Also referenced as

44Q511DO

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	J Not stocked, centrally procured — the government does not stock this item; it is procured only when a requisition arrives. SECO has 1 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 2540-01-369-3541?
NSN 2540-01-369-3541 (2540013693541) — Nonmetallic Hose Assembly: SECO Parts has 1 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 2540 (Vehicular Furniture and Accessories).

Is NSN 2540-01-369-3541 available?
SECO Parts has 1 in stock in Augusta, GA — order or request a quote below.

How much does NSN 2540-01-369-3541 cost?
SECO typically prices parts like NSN 2540-01-369-3541 at $75–$125 each: an estimate from the government catalog price and what SECO has charged for similar parts. It is not a quote — request one for your price, usually answered the same business day. Quote lines carry a $50 minimum.

What does NSN 2540-01-369-3541 fit?
The federal catalog lists NSN 2540-01-369-3541 as used on: Truck Mounted Crane (3810-01-268-1737).

What part numbers cross-reference to NSN 2540-01-369-3541?
Part numbers that cross-reference this NSN include 1C00964GGH0400A, FL1009GGH0400. It is also referenced by older, superseded or advisory numbers: 44Q511DO. SECO can quote against any of them.