Sensitive Switch P/N SM-D-450135

Specifications

Maximum voltage rating in volts

AC 250.0 and DC 30.0

Overall length

0.781 in (nominal)

Overall height

0.479–0.499 in

Overall width

0.240–0.260 in

Body length

0.771–0.791 in

Body width

0.240–0.260 in

Switch actuating force

3.0–5.0 oz

Actuator movement

Pretravel Inches Maximum 0.020 and Overtravel Inches Minimum 0.003 and Differential Inches Maximum 0.005

Contact load current rating at maximum rated voltage

Amperes Resistive DC 4.000 and Amperes Inductive DC 3.000 and Amperes Resistive AC 5.000

Terminal type and quantity

Tab, Solder Lug 3

Switch release force

1.0 oz minimum

Unthreaded mounting hole diameter

0.087–0.090 in

Center to center distance between mounting facilities parallel to length

0.365–0.385 in

Hazardous locations/environmental protection

Dustproof

Actuator diameter

0.087–0.097 in

Mounting method

Unthreaded Hole(S)

Nonpile-up contact arrangement

Single Switch Unit Pole, Double Throw, Both Positions Maintained 1

Body height

0.346–0.366 in

Actuator height

0.020 in maximum

Inclosure type

Fully Inclosed

Actuator free position height

0.330 in (nominal)

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

SM-D-450135 P0S02013596 508A188P1 228MS044P001 11SM1 1227608-1 SM-D-456220-2 00662-0009-0 721899-139 697255-027 56050-1 2207-009 P030542 8059155 10538582 8602590 E30416-30 EW7204 50162-9 A1S1-131-1 2013596

Also referenced as

4-7204 1734-7204

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 2 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5930-00-583-6582?
NSN 5930-00-583-6582 (5930005836582) — Sensitive Switch: SECO Parts has 2 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for sensitive switch in federal supply class 5930 (Switches).

Is NSN 5930-00-583-6582 available?
SECO Parts has 2 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5930-00-583-6582 cost?
NSN 5930-00-583-6582 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.

What part numbers cross-reference to NSN 5930-00-583-6582?
Part numbers that cross-reference this NSN include SM-D-450135, P0S02013596, 508A188P1, 228MS044P001, 11SM1, 1227608-1, SM-D-456220-2, 00662-0009-0. It is also referenced by older, superseded or advisory numbers: 4-7204, 1734-7204. SECO can quote against any of them.