Nonmetallic Hose Assembly P/N F8811717-20-20-20-24.00-180

Specifications

Inside diameter

1.250 in (nominal)

Temp rating

Single Response Fahrenheit -40.0 and Fahrenheit 200.0

Flange thickness

First End Inches Nominal 0.560

Outside diameter

1.800 in (nominal)

Minimum inside bending radius

Inches 8.000

Exterior color

Black

Angle between rigid elbow fittings in deg

180.0

Flange outside diameter

First End Inches Nominal 2.000

End flange construction

First End Solid

End connection design

First End Elbow

Connection type

First End Plain Face Flange

Burst test pressure

Pounds Per Square Inch 800.0

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 200.0

Hydrostatic test pressure

Pounds Per Square Inch 400.0

Flow angle

First End Degrees 45.0

Outer covering environmental protection

Oil Resistant and Weatherproof

Vacuum in torr

50.8

Inside surface condition

Smooth

Measuring method and length

Inches Nominal Working 24.000

Media for which designed

Single Response Fuel/oil, Hydrocarbon

Item structural composition

Outer Layer Molded Rubber, Synthetic

Item structural composition

Third Layer Braided Textile Yarn

Item structural composition

First Layer Braided Textile Yarn

Item structural composition

Second Layer Helix Wire Coil

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

F8811717-20-20-20-24.00-180 2C380NNN0240A180AA 7-543-001265 U2-HL20-20PA45X20PA45-24-180 20SW-20SF45-20SF45-180-24.00 20SW-20SF45-20S45-180-24.00 219C20-S45A20-S45A20-24-180 FK813NNN0240180

Also referenced as

6-294-0005268

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	J Not stocked, centrally procured — the government does not stock this item; it is procured only when a requisition arrives. SECO has 1 on the shelf
Unit of issue	AY assembly
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 4720-01-173-4141?
NSN 4720-01-173-4141 (4720011734141) — Nonmetallic Hose Assembly: SECO Parts has 1 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 4720 (Hose and Flexible Tubing).

Is NSN 4720-01-173-4141 available?
SECO Parts has 1 in stock in Augusta, GA — order or request a quote below.

How much does NSN 4720-01-173-4141 cost?
The government catalog (FEDLOG) lists NSN 4720-01-173-4141 at $264.15 per assembly. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What part numbers cross-reference to NSN 4720-01-173-4141?
Part numbers that cross-reference this NSN include F8811717-20-20-20-24.00-180, 2C380NNN0240A180AA, 7-543-001265, U2-HL20-20PA45X20PA45-24-180, 20SW-20SF45-20SF45-180-24.00, 20SW-20SF45-20S45-180-24.00, 219C20-S45A20-S45A20-24-180, FK813NNN0240180. It is also referenced by older, superseded or advisory numbers: 6-294-0005268. SECO can quote against any of them.