Shaft Collar P/N 7012800

Specifications

Material document and classification

Fed Spec 1ST Material Response QQ-S-631, CO- 1010-CANCELED and Fed Spec 2ND Material Response QQ-S-631, CO- 1020-CANCELED and Fed Spec 3RD Material Response QQ-S-634, CO- 1010-CANCELED and Fed Spec 4TH Material Response QQ-S-634, CO- 1020-CANCELED and Fed Spec 5TH Material Response QQ-S-698

Angle between centerlines of securing holes in deg

180.0

Securing hole type and location

Unthreaded Single Hole

Surface finish

Inside Periphery Microinches 125

Surface treatment

Cadmium and Chromate and Zinc

Securing hole quantity

2

Outside diameter

1.000 in (nominal)

Material

Steel Comp 1010 or Steel Comp 1020 or Steel Comp 1008 or Steel Comp 1009 or Steel Comp 1015 or Steel Comp 1018 or Steel

Surface finish

Both Bearing Flats Microinches 125

Bore diameter

0.5000–0.5080 in

Thickness

0.380 in (nominal)

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

7012800

Also referenced as

805-1624090PC52 805-1624075PC52 EJ-10089-4 8100-1252-0060 PC NO 52 8100-1252-0059 8100-1252-0061 PC 52 805-1624082 PC 52 805-1645438 PC5 805-1645438PC52 805-1624071 PC5 805-1624073 PC5 8100-1252-0058

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	D DLA/GSA stocked — stocked by DLA or GSA and issued from central stock
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 3040-00-701-2800?
NSN 3040-00-701-2800 (3040007012800) — Shaft Collar: SECO Parts has 6 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for shaft collar in federal supply class 3040 (Miscellaneous Power Transmission Equipment).

Is NSN 3040-00-701-2800 available?
SECO Parts has 6 in stock in Augusta, GA — order or request a quote below.

How much does NSN 3040-00-701-2800 cost?
NSN 3040-00-701-2800 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.

What part numbers cross-reference to NSN 3040-00-701-2800?
Part numbers that cross-reference this NSN include 7012800. It is also referenced by older, superseded or advisory numbers: 805-1624090PC52, 805-1624075PC52, EJ-10089-4, 8100-1252-0060 PC NO 52, 8100-1252-0059, 8100-1252-0061 PC 52. SECO can quote against any of them.