Fixed Ceramic Dielectr Capacitor P/N RPE114X7R474K100V

Specifications

Reliability indicator

Not Established

Terminal length

1.500 in minimum

Body length

0.300 in maximum

Body width

0.300 in maximum

Body height

0.100 in maximum

Center to center distance between terminals parallel to length

0.100 in (nominal)

Terminal diameter

0.016 in (nominal)

Capacitance value per section

Microfarads Single Section 0.470

Voltage temp limits per section in percent capacitance change

Without Voltage Applied Single Section -15.0 to 15.0

Nonderated operating temp

Celsius Minimum -55.0 and Celsius Maximum 125.0

Nonderated continuous voltage rating and type per section

DC Single Section 100.0

Tolerance range per section

Percent Single Section -10.00 to 10.00

Insulation resistance at reference temp

Megohms 100000.0

Dissipation factor at reference temp in percent

2.5000

Terminal surface treatment

Solder

Material

Case Plastic

Terminal type and quantity

Uninsulated Wire Lead 2

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

RPE114X7R474K100V C340C474K1R5CA 821-068-002 SR401C474KAA 8131-100X7RO-474K 8141M100X7RO-474K 8131050651-474M

Also referenced as

CY30A474M B37901C0474K100 520605012 26383-531H W63C-Z5U-474Z-500-C4 135-4742 8131-100X7R0-474 A3088717-19 SR401C474KAT

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	J Not stocked, centrally procured — the government does not stock this item; it is procured only when a requisition arrives. SECO has 2 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5910-01-122-6582?
NSN 5910-01-122-6582 (5910011226582) — Fixed Ceramic Dielectr Capacitor: SECO Parts has 2 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for fixed ceramic dielectr capacitor in federal supply class 5910 (Capacitors).

Is NSN 5910-01-122-6582 available?
SECO Parts has 2 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5910-01-122-6582 cost?
NSN 5910-01-122-6582 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.

What part numbers cross-reference to NSN 5910-01-122-6582?
Part numbers that cross-reference this NSN include RPE114X7R474K100V, C340C474K1R5CA, 821-068-002, SR401C474KAA, 8131-100X7RO-474K, 8141M100X7RO-474K, 8131050651-474M. It is also referenced by older, superseded or advisory numbers: CY30A474M, B37901C0474K100, 520605012, 26383-531H, W63C-Z5U-474Z-500-C4, 135-4742. SECO can quote against any of them.