Fixed Ceramic Dielectr Capacitor P/N CC21SH270G

Specifications

Insulation resistance at maximum operating temp

Megohms 1000.0

Reliability indicator

Not Established

Body diameter

0.225 in (nominal)

Body length

0.430 in (nominal)

Terminal height from body

1.312 in minimum

Insulation resistance at reference temp

Megohms 50000.0

Quality factor at reference temp

940.0000

Terminal surface treatment

Solder

Material

Case Ceramic

Test data document

Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data in Specification Format; Excludes Commercial Catalogs, Industry Directories, and Similar Trade Publications, Reflecting General Type Data on Certain Environmental and Performance Requirements and Test Conditions That Are Shown AS "Typical", "Average", "Nominal", Etc.). 81349--IL-C-20

Terminal type and quantity

Uninsulated Wire Lead 2

Nonderated continuous voltage rating and type per section

DC Single Section 500.0

Tolerance of temp coefficient per section in ppm per deg celsius

Single Section -60.0 to 60.0

Tolerance range per section

Percent Single Section -2.00 to 2.00

Temp coefficient of capacitance per section in ppm per deg celsius

Single Section -330.0

Nonderated operating temp

Celsius Minimum -55.0 and Celsius Maximum 125.0

Capacitance value per section

Picofarads Single Section 27.000

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

CC21SH270G CC22SH270G

Also referenced as

95630-2 331-051S2H0-270G CC22SH270J 928-0376-000

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	J Not stocked, centrally procured — the government does not stock this item; it is procured only when a requisition arrives. SECO has 4 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5961-00-853-6434?
NSN 5961-00-853-6434 (5961008536434) — Fixed Ceramic Dielectr Capacitor: SECO Parts has 4 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for fixed ceramic dielectr capacitor in federal supply class 5961 (Semiconductor Devices and Associated Hardware).

Is NSN 5961-00-853-6434 available?
SECO Parts has 4 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5961-00-853-6434 cost?
NSN 5961-00-853-6434 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.

What part numbers cross-reference to NSN 5961-00-853-6434?
Part numbers that cross-reference this NSN include CC21SH270G, CC22SH270G. It is also referenced by older, superseded or advisory numbers: 95630-2, 331-051S2H0-270G, CC22SH270J, 928-0376-000. SECO can quote against any of them.