Nonmetallic Hose Assembly P/N 13211E3036-3

Specifications

Temp rating

Single Response Fahrenheit -40.0 and Fahrenheit 200.0

Features provided

Reusable End Fittings

Burst test pressure

Pounds Per Square Inch 16000.0

Nominal thread size

First End Inches 0.750

Inside diameter

0.375 in (nominal)

Measuring method and length

Inches Nominal Overall 53.000

Special features

Aluminum Identification Sleeve on Hose,MIL-L-52325,Paragraph 3.9.1

Thread direction

First End Right-Hand

Minimum inside bending radius

Inches 5.000

End connection design

First End Straight

Connection type

First End Threaded Internal Tube

Media for which designed

Single Response Fuel/oil, Hydrocarbon

Item structural composition

First Layer Braided Steel Wire

Item structural composition

Outer Layer Molded Rubber, Synthetic

Item structural composition

Second Layer Braided Steel Wire

Special test features

Mil-,-52325,Paragraph 4.7.2.1

Thread series designator

First End UNF

Outside diameter

0.875 in (nominal)

Outer covering environmental protection

Abrasion Resistant and Oil Resistant and Weatherproof

Inside surface condition

Smooth

Thread class

2B

Hydrostatic test pressure

Pounds Per Square Inch 7000.0

Seat angle

First End Degrees 37.0

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 4000.0

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

13211E3036-3 FB8628-03 FB8628-

Also referenced as

13211E3036

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 5 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 4720-00-872-7715?
NSN 4720-00-872-7715 (4720008727715) — Nonmetallic Hose Assembly: SECO Parts has 5 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 4720 (Hose and Flexible Tubing).

Is NSN 4720-00-872-7715 available?
SECO Parts has 5 in stock in Augusta, GA — order or request a quote below.

How much does NSN 4720-00-872-7715 cost?
SECO typically prices parts like NSN 4720-00-872-7715 at $95–$160 each: an estimate from the government catalog price and what SECO has charged for similar parts. It is not a quote — request one for your price, usually answered the same business day. Quote lines carry a $50 minimum.

What part numbers cross-reference to NSN 4720-00-872-7715?
Part numbers that cross-reference this NSN include 13211E3036-3, FB8628-03, FB8628-. It is also referenced by older, superseded or advisory numbers: 13211E3036. SECO can quote against any of them.