Toggle Switch P/N MILS13735

Specifications

Body width

0.938–1.000 in

Body length

2.219–2.281 in

Overall length

2.250 in (nominal)

Thread series designator

Unified National Coarse (UNC)

Terminal type and quantity

Connector, Receptacle 2

Nominal thread size

Inches 0.164

Center to center distance between mounting facilities parallel to length

1.796–1.828 in

Overall height

2.563 in (nominal)

Overall width

0.969 in (nominal)

Thread quantity per inch

32

Actuator height

0.719–0.781 in

Nonpile-up contact arrangement

Single Switch Unit Pole, Single Throw, Both Positions Maintained 1

Contact load current rating at maximum rated voltage

Amperes Resistive DC 25.000 and Amperes Inductive DC 15.000 and Amperes Lamp DC 6.000

Test data document

Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data in Specification Format; Excludes Commercial Catalogs, Industry Directories, and Similar Trade Publications, Reflecting General Type Data on Certain Environmental and Performance Requirements and Test Conditions That Are Shown AS "Typical", "Average", "Nominal", Etc.). 81349--ILS to 3735

Actuator position-action relationship

UP Position Maintained and Down Position Maintained

Maximum voltage rating in volts

DC 24.0

Inclosure type

Fully Inclosed

Hazardous locations/environmental protection

Watertight

Body height

1.594–1.656 in

Mounting method

Unthreaded Hole(S)

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

MILS13735 MS39061-1

Also referenced as

8376806 954282 0624A0400 29WP51-1ACM 484493 3M5998 D42006 60093

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 92 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5930-00-296-6318?
NSN 5930-00-296-6318 (5930002966318) — Toggle Switch: SECO Parts has 92 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for toggle switch in federal supply class 5930 (Switches).

Is NSN 5930-00-296-6318 available?
SECO Parts has 92 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5930-00-296-6318 cost?
SECO typically prices parts like NSN 5930-00-296-6318 at $90–$150 each: an estimate from the government catalog price and what SECO has charged for similar parts. It is not a quote — request one for your price, usually answered the same business day. Quote lines carry a $50 minimum.

What part numbers cross-reference to NSN 5930-00-296-6318?
Part numbers that cross-reference this NSN include MILS13735, MS39061-1. It is also referenced by older, superseded or advisory numbers: 8376806, 954282, 0624A0400, 29WP51-1ACM, 484493, 3M5998. SECO can quote against any of them.