Sensitive Switch P/N 9180-4-2

Specifications

Actuator movement

Pretravel Inches Minimum 0.015 and Overtravel Inches Minimum 0.015 and Differential Inches Maximum 0.005

Contact load current rating at maximum rated voltage

Amperes Resistive DC 15.000 and Amperes Inductive DC 7.500 and Amperes Lamp DC 7.500

Actuator diameter

0.438 in (nominal)

Overall height

0.375 in (nominal)

Overall width

0.813 in (nominal)

Switch actuating force

16.0–32.0 oz

Hazardous locations/environmental protection

Weatherproof

Overall length

2.435 in (nominal)

Inclosure type

Fully Inclosed

Nonpile-up contact arrangement

Single Switch Unit Pole, Single Throw, Normally Open, Momentary Action 1

Switch release force

6.0 oz minimum

Criticality code justification

Feat

Actuator height

0.062 in (nominal)

Maximum voltage rating in volts

DC 24.0

Test data document

Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data in Specification Format; Excludes Commercial Catalogs, Industry Directories, and Similar Trade Publications, Reflecting General Type Data on Certain Environmental and Performance Requirements and Test Conditions That Are Shown AS "Typical", "Average", "Nominal", Etc.). 81349--IL-S-13484

Terminal type and quantity

Wire Lead 2

Specification/standard data

Government Standard 96906--S39058

Body length

1.813 in (nominal)

Body width

0.813 in (nominal)

Body height

0.281 in (nominal)

Special features

Essential to Weapon System Performance

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

9180-4-2 MIL-S-13484 MS39058-1

Also referenced as

270 P1617 P4550 201 7974220 10233590

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	D DLA/GSA stocked — stocked by DLA or GSA and issued from central stock
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	P No HMIS record; MSDS may apply by end use

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 5930-00-699-9085?
NSN 5930-00-699-9085 (5930006999085) — Sensitive Switch: SECO Parts has 971 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for sensitive switch in federal supply class 5930 (Switches).

Is NSN 5930-00-699-9085 available?
SECO Parts has 971 in stock in Augusta, GA — order or request a quote below.

How much does NSN 5930-00-699-9085 cost?
The government catalog (FEDLOG) lists NSN 5930-00-699-9085 at $102.08 per each. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What part numbers cross-reference to NSN 5930-00-699-9085?
Part numbers that cross-reference this NSN include 9180-4-2, MIL-S-13484, MS39058-1. It is also referenced by older, superseded or advisory numbers: 270, P1617, P4550, 201, 7974220, 10233590. SECO can quote against any of them.