Nonmetallic Hose Assembly P/N MS8005E100C

Specifications

Thread class

3B

Thread direction

First End Right-Hand

Thread direction

Second End Right-Hand

Inside diameter

0.188 in (nominal)

Temp rating

Single Response Fahrenheit -67.0 and Fahrenheit 450.0

Outside diameter

0.312 in (nominal)

Minimum inside bending radius

Inches 2.000

End connection design

First End Straight

End connection design

Second End Elbow

Connection type

First End Threaded Internal Tube

Connection type

Second End Threaded Internal Tube

Burst test pressure

Pounds Per Square Inch 12000.0

Nominal thread size

Second End Inches 0.438

Nominal thread size

First End Inches 0.438

Operating pressure

Location Not Otherwise Specified Pounds Per Square Inch (PSI) Maximum 1500.0

Seat angle

Second End Degrees 37.0

Seat angle

First End Degrees 37.0

Hydrostatic test pressure

Pounds Per Square Inch 3000.0

Flow angle

Second End Degrees 90.0

Outer covering environmental protection

Corrosion Resistant and Fuel Resistant

Vacuum in torr

50.8

Inside surface condition

Smooth

Measuring method and length

Inches Nominal Working 10.000

Item structural composition

Outer Layer Braided Corrosion Resistant Steel Wire

Thread series designator

Second End Unified National Joint Fine (Unjf)

Thread series designator

First End Unified National Joint Fine (Unjf)

Specification/standard data

Government Specification 81349--IL-H-25579

Nondefinitive spec/std data

Class 1

From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.

Cross-reference part numbers

MS8005E100C

Also referenced as

R3806CC04-0100 R50206CC-4-0100

Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.

Shown for identification only. SECO can quote against any of these numbers.

Logistics data

Source of supply	SMS DLA Land and Maritime, Columbus, Ohio
Acquisition advice code	Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 75 on the shelf
Unit of issue	EA each
Demilitarization code	A Demilitarization not required — non-munitions-list item
Controlled inventory code	U Unclassified
Hazardous material indicator	N No hazardous material

Source: public FLIS/PUB LOG cataloging data.

Why buy from SECO

These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.

In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered

FAQ

What is NSN 4720-01-031-0519?
NSN 4720-01-031-0519 (4720010310519) — Nonmetallic Hose Assembly: SECO Parts has 75 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for nonmetallic hose assembly in federal supply class 4720 (Hose and Flexible Tubing).

Is NSN 4720-01-031-0519 available?
SECO Parts has 75 in stock in Augusta, GA — order or request a quote below.

How much does NSN 4720-01-031-0519 cost?
The government catalog (FEDLOG) lists NSN 4720-01-031-0519 at $183.09 per each. That is a public reference, not SECO's price: SECO quotes each request, usually the same business day, and surplus parts often quote below or above it.

What part numbers cross-reference to NSN 4720-01-031-0519?
Part numbers that cross-reference this NSN include MS8005E100C. It is also referenced by older, superseded or advisory numbers: R3806CC04-0100, R50206CC-4-0100. SECO can quote against any of them.