NSN catalog · 90,963 partsCatalog › Hardware and Abrasives › FSC 5340 › 5340-00-954-6014
Loop Clamp P/N MS21333-121
In stock — 215 on our U.S. shelfNSN 5340-00-954-6014 5340009546014 NIIN 009546014
SECO Parts has 215 in stock of NSN 5340-00-954-6014 — Loop Clamp — on our own shelf in Augusta, GA: a stocking supplier, not a broker. Low-cost part: quoted by the line, $50 minimum per line; quantity pricing on request.
One part, one step — answered within one business day. Several parts? and send them together.
- Ships in 1–3 business days from Augusta, GA
- Certificate of Conformance on request
- PO, GPC & major cards
- $50 minimum order — smaller requests still get a quote
- 30-day returns · terms
- FLIS item name
- CLAMP,LOOP
- Federal supply class
- FSC 5340 — Hardware, Commercial
- Used on
- MRAP - Cougar CAT1 A1; Medium Mine Protected Vehicle - MMPV
- Platform
- MRAP parts
Availability & condition
| Condition | Code | Qty on shelf |
|---|---|---|
| New Surplus | NS | 215 |
| Total | 215 |
Quantities are live from SECO's inventory system, not estimated.
Also known as:
5340-00-954-6014 009546014 MS21333-121 NASM21333 303874 179147 13207E2948FN34
In the parts manual
| Manual | Figure | Item | Fits |
|---|---|---|---|
| TM 9-2320-280-24P | Fig. 18 — Fuel Tank Vent Line, Filter, and Mounting Hardware | 11 | HMMWV: All models |
| TM 9-2320-280-24P | Fig. 89 — Air-Conditioner Jumper Cable, M997, M997A1, and M997A2 Ambulance | 8 | HMMWV: M997, M997A1, M997A2 |
| TM 9-2320-280-24P | Fig. 124 — Transmission/Transfer Cooling Lines | 16 | HMMWV: All A0 and A1 models, plus M1121 |
| TM 9-2320-280-24P | Fig. 125 — Transmission/Transfer Cooling Lines | 16 | HMMWV: All A2 models, plus M1123 |
| TM 9-2320-280-24P | Fig. 159 — Front Service Brake Lines and Proportioning Valve | 12 | HMMWV: All A0 models; all A1 models except M996A1, plus M997A2, M1121 |
| TM 9-2320-280-24P | Fig. 160 — Front Service Brake Lines and Proportioning Valve | 3 | HMMWV: All A2 models, plus M1123 |
| TM 9-2320-280-24P | Fig. 161 — Rear Brake Lines and Fittings | 12 | HMMWV: All A0 and A1 models, plus M1121 |
From the Army repair parts manual's parts list and its usable-on codes. The figure page shows the exploded drawing and every other part in the assembly.
Get a quote
Build a list across as many parts as you need, send it once, get one quote back — answered within one business day, usually the same day. POs and GPC welcome. $50 minimum order.
More to tell us? Need-by date, ship-to, your own RFQ document
Specifications
- Center to center distance between loop and mounting hole
- 0.781 in (nominal)
- Tongue hole type
- Unthreaded Round
- Overall width
- 0.625 in (nominal)
- Diameter
- 0.406 in (nominal)
- Material thickness
- 0.032 in (nominal)
- Surface treatment
- Band Cadmium and Chromate
- Material
- Cushion Rubber Synthetic
- Distance from loop center to tongue end
- 1.093 in (nominal)
- Loop inside diameter
- 0.375 in (nominal)
- Material
- Band Steel Comp 1005 or Steel Comp 1006 or Steel Comp 1010 or Steel Comp 1011 or Steel Comp 1012 or Steel Comp 1013 or Steel Comp 1015 or Steel Comp 1016 or Steel Comp 1017 or Steel Comp 1018 or Steel Comp 1020
From the federal catalog's item characteristics for this NSN. Confirm critical dimensions against your part or drawing before ordering.
Cross-reference part numbers
MS21333-121 NASM21333 303874 179147
Also referenced as
13207E2948FN34
Older, superseded, advisory or drawing numbers the federal catalog associates with this NSN — the ones in an old manual. They find the item; confirm the current part number when you order.
Shown for identification only. SECO can quote against any of these numbers.
Logistics data
| Source of supply | SMS DLA Land and Maritime, Columbus, Ohio |
| Acquisition advice code | Z Insurance/numeric stockage objective — held by the government as insurance stock for contingencies, not for routine issue. SECO has 215 on the shelf |
| Unit of issue | EA each |
| Demilitarization code | A Demilitarization not required — non-munitions-list item |
| Controlled inventory code | U Unclassified |
| Hazardous material indicator | P No HMIS record; MSDS may apply by end use |
Source: public FLIS/PUB LOG cataloging data.
Why buy from SECO
These quantities sit on our own shelves — we are a stocking supplier, not a broker sourcing after you order. Condition-coded stock, formal quotes with NSN/PN on the paperwork, POs and GPC welcome, fast U.S. shipping.
In business since 1951 · 30,000+ contracts completed · about SECO & our policies · more questions answered
FAQ
What is NSN 5340-00-954-6014?
NSN 5340-00-954-6014 (5340009546014) — Loop Clamp: SECO Parts has 215 in stock in Augusta, GA, on our own shelf. It is the NATO Stock Number for loop clamp in federal supply class 5340 (Hardware, Commercial).
Is NSN 5340-00-954-6014 available?
SECO Parts has 215 in stock in Augusta, GA — order or request a quote below.
How much does NSN 5340-00-954-6014 cost?
NSN 5340-00-954-6014 is a low-cost part, so SECO quotes it by the line rather than by the piece: there is a $50 minimum per line, and quantity pricing on request — usually answered the same business day.
What does NSN 5340-00-954-6014 fit?
The federal catalog lists NSN 5340-00-954-6014 as used on: MRAP - Cougar CAT1 A1; Medium Mine Protected Vehicle - MMPV. SECO lists it under MRAP parts.
What part numbers cross-reference to NSN 5340-00-954-6014?
Part numbers that cross-reference this NSN include MS21333-121, NASM21333, 303874, 179147. It is also referenced by older, superseded or advisory numbers: 13207E2948FN34. SECO can quote against any of them.
Same item, other stock numbers
Other NSNs the federal catalog names CLAMP,LOOP. Same name is not the same part: check the part numbers.